A ball-peen or ball pein hammer, also known as a machinist’s hammer, is a type of peening hammer used in metalworking. It has two heads, one flat and the other, called the peen, rounded.
How is a spud wrench different than a pipe wrench?
The Spud wrench has a smooth jaw enough to grip on nuts and bolts, while the pipe wrench often acts as a better fastener because of its gripping hook jaw and weight.
In what way is a spud wrench?
A spud wrench is a wrench with an adjustable or standard box wrench on one end and a tapered spike on the other. The spike can be used to line up bolt holes when installing pipe fittings, doing automotive work or—in the case of iron workers—for lining up bolt holes in girders and beams.
When an object is plumb it means that it is _____?
Plumb is the counterpart to level, which means to be perfectly horizontal.
What tool is used to drive posts or other large stakes?
Sledgehammer is a heavy-duty tool used to drive posts or other large stakes.
Which type of screwdriver is characterized by an hourglass shaped tip?
Robertson screwdrivers are usually color coded according to size. Clutch-drive. This has an hourglass-shaped tip that is especially useful when extra holding power is needed, as when working on cars or appliances. Torx.
Why do they call a pipe wrench a monkey wrench?
Charles Moncky, a Baltimore mechanic, invented the monkey wrench around 1858. Moncky’s wrench was named using a purposeful misspelling of his name.
What type of pliers could be used for cutting heavy duty wire?
Lineman’s Pliers: These instruments are used for gripping and contorting wires and cables. Typically found in electrical and lineman industries (hence the name), these types of pliers are advanced and heavy duty for professional use.
What is a striking wrench?
Striking wrenches (also known as slugging wrenches) are short, thick wrenches with a block shape on the end of the handle that is struck with a hammer. The wrench is placed on a fastener and the block end is struck with a hammer to provide additional force to loosen or tighten frozen and rusty nuts and bolts.
What tool is a spud?
The bark spud (also known as a peeling iron, peeler bar, peeling spud, or abbreviated to spud) is an implement which is used to remove bark from felled timber.
What is a construction wrench?
Definition of construction wrench
: an open-end wrench used by steel construction workers and having a long handle tapering to a blunt point that is used to hold matching holes (as for bolts or rivets) in alignment.
How do you use a spud tool?
What Is a Spud Wrench?
Which Pliers are used to get into narrow places where other players Cannot reach?
Terms in this set (4)
- Slip Joint Pliers. Used to Hold and bend wire and to grip and hold objects during assembly.
- Long Nose Pliers. Used to get into tight places where other pliers won’t reach.
- Lineman Pliers. Have a wider, heavier jaws than others.
- Tongue and Groove Pliers.
Which Pliers are used to get into tight places where other pliers won’t reach?
Needle-nose pliers have pointy, long-jawed pliers that can reach into extremely tight places. They can also help you get a grip on tiny objects at awkward angles.
Which type of saw has a thin one piece blade which runs around guides on either end of the saw?
The bandsaw has a one-piece blade that runs in one direction around guides at either end of the saw. The blade is a thin, flat piece of steel.
What tool is shaped like an L and is often used for checking sections?
Hand Tools Terms #1
|carpenter’s square||Shaped like an L, it is used tomake sure wall studs and sole plates are at right angles to each other|
|chisel||A metal tool with a sharpened, beveled edge that used to cut and shape wood, stone, or metal|
|claw hammer||used to drive nails and to pull nails out of wood|
What is a Bell faced hammer?
Term. Bell-faced Hammer. Definition. A claw hammer with a slightly rounded (convex) face used to sink nials with out damaging the wood.
Which hammer is used for driving large stakes?
Heavier sledge hammers with longer handles are intended to be swung with both hands. Sledge hammers are best for: Breaking stone. Driving stakes.
Which type of pliers are used to hold and bend wire and to grip and hold objects during assembly?
Proper use of flat nose pliers: Common pliers, used in many applications and assembly work. Use to grip, turn and bend wires.
What type of mechanism do socket wrenches use quizlet?
Uses a ratcheting mechanism that hols the socket in place when pulled in one direction and releases when pulled in the other direction.
Which type of square combines a protractor try square and framing square?
A speed square, also called a rafter square, rafter angle square, and triangle square, is a multi-purpose triangular carpenters’ tool use for marking out. Its functions include many of those of a combination square, try square, and framing square.
What’s another name for a monkey wrench?
Also called, especially British, adjustable spanner. a wrench having an adjustable jaw permitting it to grasp nuts or the like of different sizes.
What is a pipe wrench called?
The Stillson wrench, or Stillson-pattern wrench, is the usual form of pipe wrench, especially in North America.
What’s the real name for a monkey wrench?
What is another word for monkey wrench?
|adjustable spanner||obstruction wrench|
|Stillson wrench||shifting spanner|
What are lineman pliers used for?
Lineman’s pliers are used by electricians to straighten, cut, grip, twist, push, and pull wire. They are used to cut and bend light gauge metal and pull staples and nails. The angular edges on the outside edge of the jaws are designed to ream down ridges and burs on the inside lip of cut pipes.
What is the name of plier?
Learn about five types of pliers: slip-joint, water-pump, linesman, locking and needle-nose.
What type of pliers that is only used to cut wires and cables?
A plier-like tool designed for cutting wires is often called diagonal pliers.
What is a spanner?
A wrench or spanner is a tool used to provide grip and mechanical advantage in applying torque to turn objects—usually rotary fasteners, such as nuts and bolts—or keep them from turning.
What are slogging spanners?
A slogging spanner has a thick end that is designed to be used with a hammer to tighten fasteners, such as nuts and bolts to a precise torque. Slogging spanners are also ideal to untighten fasteners which are stuck, as they pass high levels of force and vibration through to the nut or bolt when hit with a hammer.
What is a slug wrench used for?
A slugging wrench will have a rectangular handle that is flatter compared to a striking wrench. A slugging wrench is used to loosen rusty, frozen, or stuck nuts and bolts. You tighten the slugging wrench around the nut or bolt, then strike the wrench with a hammer to loosen it.