Contents
on two corners of the intersecting street. unless a sign prohibits it. flashing red lights and a crossing gate.
What are the three parts of a freeway entrance?
Terms in this set (4)
- The three parts of every freeway on-ramp are: 1) entrance ramp, 2) acceleration lane, 3) merging area.
- When do you signal for exiting the freeway? 100 feet before exiting.
- Where do you slow down when exiting the freeway? The Deceleration Lane.
- What is highway hypnosis?
How can you identify a one way street quizlet?
Terms in this set (4)
- One way Sign. If present one way street is also present.
- Lane Markings. If White and yellow markings are present, two-way
If only white, one-way. - Parked vehicles. Vehicles are always parked in same direction of flow of traffic.
- Road signs. All road signs face opposite the flow of traffic.(ex.
How large of a gap do you need if you plan to cross a street with traffic moving at 30 mph?
Traffic is moving at 30 mph on a street you plan to cross. You should about two thirds of a block gap in each direction before crossing. Turning right and accelerating to 30mph takes about 6 seconds.
Where are yield signs placed?
Standard: 01 The STOP or YIELD sign shall be installed on the near side of the intersection on the right-hand side of the approach to which it applies. When the STOP or YIELD sign is installed at this required location and the sign visibility is restricted, a Stop Ahead sign (see Section 2C.
When a paved road intersects an unpaved road?
When a single- or two-lane road intersects with a multi-lane road, traffic on the single- or two-lane road yields right of way to traffic on the bigger highway. When an unpaved road intersects with a paved road, the driver on the dirt or gravel road must yield the right of way to vehicles on the paved road.
What is entrance ramp?
noun. US. a short road connecting a motorway, etc, to another road.
What are the 3 components of an expressway that allows car to enter onto the road *?
Entering an expressway – expressway entrances include three areas: the entrance ramp, the acceleration lane, and the merge area. The entrance ramp allows the driver time to search the expressway and evaluate speed and available space before entering.
What is the purpose of an entrance ramp?
The entrance ramp allows the driver time to search traffic for flow and traffic gaps, and evaluate speed and space requirements before entering. These ramps may be uphill, downhill, or level with the expressway. Some expressways may include a ramp meter to control the traffic entering.
How do you identify a one-way street?
You will recognize one-way streets from the signs and markings on the road. Broken white lines separate traffic lanes on one-way streets. You will not see yellow markings on a one-way street. When driving on one-way streets with multi-lanes, always choose the lane with fewest hazards.
What are four ways to identify a one-way street?
List four ways you can identify ONE-WAY streets.
- Signs.
- only white dividing lines (no yellow)
- The direction traffic is moving.
- the direction of parked cars.
When deciding to proceed through an intersection we need to make sure which zone is clear?
When you have an open front zone and a clear gap of at least seven seconds from the left and right, proceed by accelerating to the proper speed. Once through the intersection, check your rear zone.
How many car lengths should be between cars?
Rule #1: Do Not Tailgate
“Here’s the deal. Figure one car length for every ten miles an hour,” Barndt said. “So if you’re doing 55 miles an hour you should have six car lengths between you so that if something happens to the car in front of you, you have time to stop or react.”
What distance should be between cars?
The rule of thumb is to maintain at least a three-second following distance, giving you time to react and avoid potentially dangerous situations. You can calculate this by using a fixed object, such as a pole or an overpass to determine how far in front of you the car is.
How much space should you leave between cars?
The easiest way to judge a safe gap is to use the two-second rule. By keeping a minimum of a two second time gap in front of your vehicle (double in poor weather) you will create space in which to react to any emergency that happens ahead. In wet weather or on poor road surfaces you should double this gap.
What is yield road?
The yield sign is a regulatory sign. At a yield sign, drivers must slow down and yield the right-of-way to pedestrians and vehicles that are approaching from another direction. Shape: downward-pointing triangle.
What does the white line mean?
WHITE LINES painted on the pavement indicate traffic traveling in your direction. Broken White Line: you may change lanes if it is safe to do so. Solid White Line: requires you to stay within the lane and also marks the shoulder of the roadway.
What does a green arrow mean?
GREEN ARROW—A green arrow means GO, but first you must yield to any vehicle, bicycle, or pedestrian still in the intersection. The green arrow pointing right or left allows you to make a protected turn
oncoming vehicles, bicycles, and pedestrians are stopped by a red light as long as the green arrow is lit.
When approaching an intersection of a through street traveling from a street that ends at the intersection you must stop and yield the right-of-way to which of the following?
A T Intersection is an intersection that occurs when a road dead ends into a through street. If you are driving on the dead end road, you must yield to traffic that is going past from the left and right.
When entering a street from an unpaved road you should?
When entering a street from an unpaved road, you should: Yield to the vehicle on the paved road in all instances.
When entering a public paved road from a private road driveway or unpaved road you must?
Explanation When entering a public highway from an alley, private road, or driveway, you must yield to traffic already on the roadway. Enter traffic when it is safe to do so.
What is ramp in road construction?
Highway ramps are the connecting slope portion that has been built in order to connect two roads at different levels. For example: A ramp in from of a gate is used to connect road and the parking area. In highways design speed of ramps shall be related to the design speed of major road connecting.
What is a declaration lane?
Deceleration lanes allow traffic exiting a major street to slow down to a safer speed to make a left or right turn at an intersection without affecting the main flow of traffic. Dedicated acceleration lanes allow cars that are joining the main road to speed up to match the flow of traffic.
What are weave lanes?
Typically, lane weaving means that one vehicle is going to another lane and then returning to their original lane later. Sometimes though, a car may also weave within their own lane to overtake other vehicles. It’s also worth taking the time to clear up an important point here.
When can you drive through curves?
Reduce your speed before approaching a curve. Watch out for road signs warning of approaching curves so that you have ample time to slow down before steering through the curve. It is advisable to drive below the posted speed limit as you approach and drive through curves. Turn as little as possible.
When a side road forms at intersection with an expressway it is called a?
When a side road forms a T intersection with an expressway it is a called trumpet interchange.
Which of these is a safe thing to do when driving through a tunnel?
While there are some guidelines you should take into consideration, for the most part, driving in a tunnel is much like driving on the open road.
- Be Aware As You Approach The Tunnel.
- Use Extra Caution in the Tunnel.
- When Things Get Slow.
- Stay Calm in an Emergency.
What does exit ramp mean?
(ˈɛksɪt ræmp ) noun. a short roadway by which vehicles may leave a major highway.
What is a freeway on ramp?
Freeway to Freeway Ramp Signals
What is access ramps in expressway?
These parallel surface roads provide a transition between high-speed “through” traffic and local traffic. Frequent slip-ramps provide access between the freeway and the frontage road, which in turn provides direct access to local roads and businesses.